84-04 Universal Tester 50kN - AT

INTRODUCTION

The 50kN is a two-column, Universal tester that can be programmed with up to 100 different test methods. These tests range from the most basic to the most sophisticated machine control, all with full graphics and statistical display. They are ideal solutions to testing problems where there is a need for precise, efficient and consistent performance.

APPLICATIONS

Plastics, Cord, Textiles, Food, Rubber,
Nonwovens, Packaging, Adhesives, Wire, Wood Products, Composites, Adhesives and Meta

FEATURES

Integral PC system running full universal windows software with industry standard and customer specific test methods pre-installed.
Touch screen display with active tester control panel and readout screen showing real time test curves calculated results and statistics. Height adjustable and fully articulated.
Optional full colour printer system mounted on universal position swivel arm.

Fully digital testing system with high precision control and accuracy, includes automated computer control of test methods giving simplicity of operation.
High resolution auto ranging load cells with accuracies better than +/-0.5% down to 1/1000th of the load cell capacity.
Automatic recognition and calibration of load cells and extensometers, with instant calibration check facility.
800% overload capability of load cells without damage.
Small footprint design, giving economy of bench and floor space.
High efficiency pre-loaded self cleaning ballscrews for fast, quiet testing. Fitted with sealed for life lubricated end bearings.
Crosshead guidance system providing precise alignment and smooth running.

Precision crosshead control via digital AC servo drive and brushless servo motor giving maintenance free operation and 4,000,000 steps per revolution positional control.
High speed data collection systems for up to 4 synchronous channels.
6 I/O channels for additional devices such as extensometers, micrometers, callipers, balances etc.
High stiffness loading frames with solid specialised steel crossheads and rigid extruded support columns with T-slots for accessory mounting.
Overload, overtravel and impact protection.
Telescopic covers giving additional protection forballscrews against dust and testing debris.
Extensive range of grips and fixtures for tension, compression, flexural, shear, peel and product testing etc.
A wide range of contacting and non-contacting extensometers is available including laser and video models.

SPECIFICATIONS

Range:	50kN	Power:	1 kW
Vertical Space:	1180 mm	Crosshead travel/ Resolution:	980 by 0.001 mm
Throat:	420 mm	Frame Stiffness:	200 kN/mm
Speed Range:	0.001 to 1000 mm/min	Speed Accuracy:	±0.1% under stable conditions
Crosshead Guidance:	Linear slides integral within column	Accuracy:	±0.5% of reading down to 1/1000th of load cell capacity.
Max Force at Full Speed	50 kN	Max Speed at Full Load	600 mm/min
Number of Columns	2	PC Controlled	Windows™ XP Software
Operating temp degree C	-10° to +40°C	Operating Humidity	+10 to +90% non-condensing
Machine Configuration	Table top, base cabinet available	Data Sampling rate	Maximum 12kHz with up to 200Hz data frames
Available load cells:	5N, 10N, 20N, 100N, 250N, 500N. 1kN, 2.5kN, 3kN, 5kN,10kN, 20kN, 25kN, 30kN, 50kN Maximum of four load cells up to capacity of machine.

Force Measurement		Extension Measurement
Universally Calibrated, better than Grade 0.5 EN 7500-1, DIN 51221 ASTM E-4. AFNOR A03-501. Range 0.4% to 100% minimum. Automatic identification of load cell. Resolution 1 part in 500000 with autoranging. Electronic load cell protection.		Comprehensive winTestT Analysis universal windows software covering tensile, compression, peel, shear, tear, cyclic, creep and multi stage testing. It includes a wide range of industry standard test methods and facility to create and store an unlimited number of further test methods. There is automated storage of all test data and ease of export to other software packages such as word, excel, access and SPC systems for enhanced report generation. winTestT Reports is an enhancement to winTest Analysis to add flexibility to data analysis and statistical reporting. The package provides a report generation capability that can include long-term statistics and control charts for all specified calculations. winTest ReportsT can also be configured to display headings, titles, company logos, graphs, charts, pop-up menus and specific technical information.
Extension Measurement
Full frame length to 0.001mm. Resolution 0.001 min. Accuracy 0.01mm. Absolute, relative and auxiliary modes mm, inch and percent. Programmable extension limits.
Speed Control
Drive system temperature and current protection. Positional jog speed 0.001mm/min to maximum. Speed setting increments 0.001mm/min.
Load Frame		Options
Rigid frame, using dual slide crosshead guidance system and rigid extruded support column. Frame stiffness 200kN/mm plus K factor facility built-in. Re-circulating ball screw with bellows. Electronic limit trips, total travel trips and customer programmable safety stops. Rubber mat front protection.		In addition to standard fixtures we can test your specimens in our applications laboratory and design special grips and fixtures for custom applications. Models are available with extended frames and wider throat.

INSTRUMENT SIZE

	Width		762 mm (30 in)
	Depth::		505 mm (19.8 in)
	Height::		1585 mm (62.4 in)
	Weight		245 kg (540 kg)

CONNECTIONS

Electrical supply: Universal input (de-rate max speed at 115V)

ORDERING INFORMATION

Catalog Number: 84-04-02-0011

Call Us Today

For additional information on Shows and Expos, or to learn how Testing Machines can help your company profit through testing, please call us at 1-800-678-3221, or e-mail info@testingmachines.com.

Search Testing Machines:

PDF Product Sheet:

84-04 Universal Tester 50kN AT

84-04 Universal Tester 50kN - AT

INTRODUCTION

APPLICATIONS

FEATURES

SPECIFICATIONS

Force Measurement

Extension Measurement

Extension Measurement

Speed Control

Load Frame

Options

INSTRUMENT SIZE

CONNECTIONS

ORDERING INFORMATION

Call Us Today